Paper Feeding Parts

the main and subsidiary Paper-Feeding Device realize the Non-stop Feeding continuously.

using the unique design feeder to realize the non-stop feeding of different thickness,different quality of the sheets .

adopting the raising type frame, adjustment more convenient.

unique the double controller to control the double sheets,reduce the waste.

it is equipped with 4 front lay and install the 4 Approach Switch,can detect the fitted-in of the sheets to avoid the waste,flexible and convenient.

there is the adjustment wheel of the timing of the paper on the conveying plate,mini-adjust the giving paper time,can match the time of the Die-cutting parts.

it’s equipped with left,right side lay,and has the two performances of the push,pull,it is convenient and fast to switch,the position of the side lay,the pressure can be adjusted,so that it’s suitable for the side positioning of the different size,the thickness of the sheets.

it’s equipped with above height device at the paper feeding parts,to protect it effectively.

it’s equipped with the gauge position at the side of the Paper Feeding parts,it is convenient to make sure the position of the paper pile.

using the electrical principles,Paper Feeding Pile realize the lifting automatically, easily to adjust.

it’s equipped with the up and down limit switch inside the wall plate,make sure the paper pile stop automatically at the highest lowest position.

Main Unit

the components of the main machine(Including the base,onstage,moving plate,wallboard) adopt the high quality resin sand ductile iron casting,improve the machine strength greatly,ensure the life of the machine.

adopting the imported pneumatic clutch,with the small volume ,heat dissipation good , short time response advantage,and maintenance convenient,suitable for the high frequence use

adopting the automatic pressure adjustment of the frequency technique control precision lead screw,making the pressure adjustment more stale and accurate at the time of improving the efficiency.

the optimized design chain mechanism adopt the high quality aluminium alloy teeth and the imported double chain,reducing the operation inertia greatly,more suitable for the high speed production.

adopting the automatic pressure device,more convenient for the operation.

the intermittent part adopt Germany import cog belts transmission,not only reduce the noise of the machine ,but benefit for the protection of the precision.

the steel plate choose high hardness,high elasticy materials , flatness is good ,durable in use, the positioning device assure the accurate positioning effectively.

the lubrication part adopt the drench lubrication,equiped with the oil radiator,suitable for the different areas customers. The transmission parts of the machine equiped with the central lubrication device,extend the life of the machine greatly.

Die - Cutting Unit

adopting the worm gear,worm transmission,the machine keep the smooth operation,long working time even if in the high speed running.

adopting the 200° intermittent structure to make the machine smooth operation,low noise,long working time in the high speed.

the Die-cutting chase is used to install the fixed Die-cutting plate specially,the fast tight device is suitable to the installation of the different size of the Die-cutting plate.

the Die-cutting chase install the machine, having the accurate positioning structure, andeasily to lock, loose, adopting the two pulling out support to pull out and push, to achieve the turning of the chase to realize the purpose of change, adjust the plate freely. the positioning system realize

the position of the front,side of the sheets, make the position more accurate, die-cutting precision more high.

the steel plate choose the high degree of hardness and high elasticity materials, good flatness, durable, the positioning device assure the accurate position effectively.