NO. | UNIT | ITEM | DESCRIPTION | REMARK |
1 |
Electrical specification
| Each unit of whole line | Total power: Fixed type 13.5HP | |
Working voltage:AC380V |
Frequency:50Hz |
Control voltage:AC220V |
Panel switch:DC24V. |
2 |
Energy Supply
| Power source | Max power 11KW | |
Air pressure source | 6Kg/Cm2 |
3 | Feeding unit |
fork mechanism: feeding by manual
| Hydraulic control | |
Designed by 4 forks, adjust for various sheet discharging. |
Fork mechanism apply for flexible joint design, it is safety. |
Apply for linear slide rail system |
Operation mode: auto(display screen set),semi auto, manual control
mode(panel operation) |
4 |
Main machine
|
Machine moving
| Button is motor-driven combine/separate control |
It can fit with printing machine for on-line control(printing
machine back, whole line back).
|
Limit switch protect stroke |
Manual and automatic control setting |
Main panel control system | Machine parts control panel, automatic function selecting of each
unit |
It can fit with printing machine on-line control (alarming,
feeding, speed adjusting)..
|
Machine interface data setting, control by manual/auto |
Conveyor belt motor
| Main machine speed adjusted by converter |
It can fit with printing machine on-line control
|
Belt width:200mm |
Manual and automatic control setting |
Hydraulic system | Apply semi-open type, the effect of heat dispelling better, easy to
maintenance. | |
working platform | Position by operation side | |
5 |
Convey system
|
Fixing arm
| Hydraulic system button control for manual and automatic lifting
and down. |
It can fit with printing machine on-line
|
With liquid valve, more safety |
Front control pane
| Manual control fixing arm lifting and down, extension arm
stretch-out, machine moving. | |
Back plate: manual and automatic control. |
main belt speed: manual and automatic control(printing machine
on-line control) |
Slope plate | Touch display screen: large/small size mode control | |
Side support roll | Adjust manual | |
Back plate | Pneumatic cylinder working, squaring the sheet, never damage. | |
Pneumatic cylinder stroke is 150mm |
Manual and automatic control |
Side baffle | Display screen: stretch in/out control |
It can fit with touch and display screen
|
apply for linear slide rail system |
Front baffle for imbricated type
| Electronic button control stretch in /out |
It can fit with touch and display screen
|
apply for linear slide rail system |
height angle can be adjusted |
6 |
Electrical control system
|
Electrical control configuration
| PLC,control mold | YONG HONG(TAIWAN) |
Converter, small relay | FU SHI(TAIWAN) |
Small braker, limit switch | JAPAN OMON |
Power supplier | MING FEI(TAIWAN) |
Touch screen | PINTONG(TAIWAN) |
Control transformer | SHUN LIANG(TAIWAN) |
Air switch | FRENCH |
Switch,button, lamp | CHINA |
optoelectronic switch | TAIWAN |
Motor, reducer | TAIWAN |
Dust stop control panel | CHINA |
Display & touch screen
| Main hydraulic machine can save energy, start control type |
Can meet customers requirement to add some functions
|
Convey system control |
Printer paper stack height(lower/middle/higher) |
Side baffle: moving control and adjust |
Intelligence system | Speed synchronous control | |
7 | Hydraulic system | System Configuration | ODP,motor:7.5HP | TAIWAN |
Metering pump | CHINA |
Electronic control valve(solenoid valve) | TAIWAN |
Solenoid directional valve, pilot operated check valve | TAIWAN |
Check valve | TAIWAN |
Oil cooler | TAIWAN |
Oil tank (dipping inside, baking outside). | TAIWAN |
Hydraulic cylinder, other accessories. | TAIWAN |
8 |
Other
|
hardware parts
| Linear slide rail | TAIWAN(HINI) |
Bearing | NSK-JAPAN |
Configurations, accessories and brand may be change without prior
notice! |
